Flange Mount Attenuators

High power flange mount components offer high performance and the convenience of bolt-on installation. Flange attenuators have an attenuation range from 1 to 30 dB. Typical attenuation tolerance for values between 1-10 dB is +/- 0.5 dB and between 11-30 dB is +/- 1.0 dB (may vary for certain products, please refer to drawing). Maximum power rating of up to 400 watts can be achieved on a single device. All devices are made RoHS compliant and available in Aluminum Nitride (AlN) or BeO.

Features

Product Selection Table

Power	Frequency	VSWR	Substrate	Length	Width	Height	Tab Width	Part #
100	2.5	1.2	AlN	0.230	0.8	0.15	0.04	33-7023-
125	2	1.3	AlN	0.375	0.875	0.17	0.04	33-7006-
75	2.2	1.2	AlN	0.375	0.87	0.15	0.04	33-7005-
100	3	1.3	AlN	0.255	0.82	0.16	0.04	33-7004-
10	2.7	1.15	AlN	0.2	0.3	0.15	0.04	33-7003-
50	2	1.4	AlN	0.375	0.975	0.21	0.059	33-7002-20.00
50	2	1.4	AlN	0.375	0.975	0.21	0.06	33-7001-20.00
250	1	1.25	BeO	0.5	1.25	0.21	0.06	33-1052-
400	1	1.3	BeO	0.5	1.25	0.21	0.06	33-1050-
250	1	1.25	BeO	0.5	1.25	0.21	0.06	33-1042-30.00
10	0.95	1.25	BeO	0.2	0.3	0.15	0.04	33-1041
50	2.5	1.4	BeO	0.375	0.975	0.21	0.06	33-1021-
10	4	1.35	BeO	0.2	0.5	0.15	0.04	33-1017
75	1	1.3	BeO	0.375	0.87	0.15	0.04	33-1009-
150	1	1.5	BeO	0.375	0.975	0.21	0.06	33-1006-
10	4	1.35	BeO	0.2	0.3	0.15	0.04	33-1005-
200	0.5	1.5	BeO	1.04	1.9	0.245	0.25	33-1004-
100	0.75	1.25	BeO	0.5	1.25	0.21	0.06	33-1003-
50	1	1.2	BeO	0.375	0.975	0.21	0.06	33-1002-
20	4	1.5	BeO	0.25	0.515	0.15	0.06	33-1001-
100	2.5	1.20	AlN	0.800	0.230	0.85	0.040	33A7023-
20	4	1.5	BeO	0.25	0.515	0.15	0.06	33A1001-F
10	4	1.35	BeO	0.2	0.3	0.15	0.04	33A1005-F
100	3	1.3	AlN	0.255	0.82	0.16	0.04	33A7004-F
100	2.5	1.2	AlN	0.230	0.8	0.15	0.04	33A7023-F
150	1.0	1.50	BeO	0.975	0.375	0.210		33A1006-20.00F